Product Name:iron railings designs powder coating outdoor use
Description of Product
Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed and sieved. The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.
It is suitable for metal/ iron/ aluminum surface of each indoor product such as furniture, electrical appliance, industrial equipment, sports equipment, hardware, shop tool rack and lamps and lanterns etc.
|Color ||Grey Color |
|Type ||Epoxy Polyester Indoor |
|Gloss ||30-50% |
|Thickness ||60-80μm |
|Hardness ||2H |
|Adhesion ||0 Grade |
|Curing ||200ºC*10mins / 180ºC*15mins |
|Shelf Life ||12 months |
Different Types of Product
1.Chrome Nano-dryplating It has applied for national patent. It meets the most strict environment demands and excellent physics and chemical properties, while the cost is much lower than electroplating. With chrome effect powder coating. (NEW AND HOT)
2.RAL Powder Coatings
3.Epoxy-polyester Powder Coatings
4.Polyester Powder Coatings (TGIC/Primid)
5.Texture Wrinkle Powder Coatings
6.Metallic Powder Coatings
7.Electrostatic Powder Coatings
8.Chrome effect Powder Coatings, etc.
|Item ||Instrument ||Standard ||Testing Result |
|Pencil hardness ||Pencil hardness instrument ||≥ H ||2H |
|Impact resistance ||Impact tester ||≥ 30 kg.cm ||30 kg.cm |
|Flexing endurance ||Bending instrument ||≤ 2mm ||No cracks nor stripping |
|Adhesive force ||Cross-Cut tester ||0 grade ||0 grade |
|Bulge ||Bulge instrument ||≥ 6 mm ||Pass |
|Resistance to salt spray ||≥ 500 Hs ||≥ 9 grade ||Pass |
|Resistance to heat and humidity ||≥ 1000 Hs ||Slight loss of gloss ||Pass |
Storage condition: at about 25ºC and at ventilated indoors, avoiding direct sunlight. Under such condition, powder can be stored for twelve months and should be re-tested if more than twelve months.
Pre-sale Notice &services
|Oven Temperature ||Heating Time |
|200°C ||10min |
|180°C ||15min |
|160°C ||20min |
metallic effect (Gold, silver) , chrome candy effect (Red, Blue, Green, Purple…), smooth effect, art textures effect (sand, wrinkle) ect.
|High gloss ||50%-90% |
|Semi gloss ||7%-50% |
|Matt gloss ||below 7% |
|Chrome Silver gloss ||450 - 600% |
|Chrome Candy Type gloss ||90 - 150% |
Trade Items of Product
|MOQ ||200KG |
|Pakage ||Box with PE plastic bag |
|Delivery Term ||FOB, CFR, CIF,EXW,Express delivery |
|Delivery Time ||15 days after pay us deposit |
|Payment Term ||T/T |
|Supply Ability ||1000 Tons/Month |
|Port ||Jiangmen / Shenzhen / Guangzhou |
1).Production workshop set up in 1989, leading powder coating supplier with rich experience in China.
2). 4 Factories in total. Three are Powder Coating Production Bases, one is Nano-Dryplating Spraying Base.
16 Production Lines. 5 Bonding Lines. 9 Sample Lines.
Annual Capacity reaches 10,000 Tons.
3). Nano-Dryplating Silver Chrome Effect Powder Coating is identified as Guangdong High-Tech Product.
4). Oversea Countries: Sweden, Turkey, Russia, Guatemala, Peru, Pakistan, UAE, etc.
Why Choose Us:
Advantages we have:
A. Experienced state products supplier;
B. Professional design team and sales department for your service;
C. Factory recognized by EN71/ ROHS/ ISO9001 and so on.
D. 7/24 services for you, all the question will be dealed within 24 hours.
Benefit you get:
A. Stable quality -- Coming from good materials and technic
B. Lower price -- Not cheapest but the lowest at the same quality
C. Good service -- Satisfactory service before and after sale
D. Delivery time -- 10-15 days for mass production
How to Order Our Product
Customers offer general information of the product.
Our technician will make a professional suggestion according to your need.
After your confirmation, we will send samples to you for evaluation.
Note: Customers can order all product samples we put or you can also have your own idea, as we are custom-made product supplier, so different colors and types are available.
Q1. Can I have a sample order for powder coating?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 3-5 days, mass production time needs 1-2 weeks for inspection and customs declaration.
Q3. Do you have any MOQ limit for powder coating?
A: Low MOQ, 1-2kg sample powder checking is available.
Q4. How to proceed an order for powder coating?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q5: Do you offer guarantee for the products?
A: Yes, we offer professional after-sale service for every customer.
Welcome to Contact Us